Injectidry Floor Drying Pack

Injectidry Floor Drying Pack

$7,040.00 inc GST

The Injectidry HP60FDP Floor Drying Package is designed specifically for floor drying. This setup is extremely quick, easy, and efficient for your typical floor drying needs. With the many different Vac-It Panels that are available, you can quickly dry almost any wood floor.
The Injectidry® HP drying system is the only truly “industrial grade” system sold today. The internal blower is a regenerative blower  and many operate 20,000 hours or more trouble free. This translates into more than 10 years of continuous operation. It is not a fan  typically associated with a portable carpet cleaning machine or shop-vac.
Enquire today

Includes

The Injectidry HP60i Floor Drying Package includes the following:

  • 1 – HP60 Unit (OE-IDS60B-EA)
  • 1 – Main AIR IN – Quick Connects installed at factory (MP-PTFC-EA)
  • 1 – Main AIR OUT – Quick Connects installed at factory (MP-PTMA-EA)
  • 1 – AIR OUT Main Hose – 6’ w/factory-set PRV (MP-AOMH-EA)
  • 1 – AIR IN Main Hose – 6’ inline filter, factory-set PRV & Main QCT (MP-AIMH-EA)
  • 1 – Carry Bag (OE-ICB-EA)
  • 1 – Rolling Duffle Bag (OE-DB-EA)
  • 2 – 1.5″ x 50′ Safety Yellow Blank Hose (MP-IDPL03-EA)
  • 7 – Quick Connect Panel T’s (OE-VACT-EA)
  • 14 – Hosecuffs (MP-HC3-EA)
  • 6 – Quick Connect – Manifolds (MP-QCM01-EA)
  • 7 – End Cap Plugs (MP-IDQCEP01-EA)
  • 1 – Variety Panel Package (OE-IVIVP-EA) includes
    • 6 – Large Multi-Port Panels (OE-IVIPSP5-EA)
    • 1 – Large 8-Point Panel (OE-IVIPP-EA)
    • 1 – Clear Panel (OE-IVIPPC-EA)
    • 1 – U-Panel Kit (OE-VACITPUK-EA) includes
      • 1 – U-Panel
      • 3 – Small Panels with 3/8-in port
  • 1 – 3/8″ x 200′ Safety Yellow Tubing (OE-RH05A-EA)
  • 40 – Soft Tubing Stoppers (OE-RP2-EA)
  • 1 – Silencer (OE-IDS60SIL-EA)
  • 1 – Manual & CD

Specifications

Vacuum Options: 2 x 1100 Watt 2 Stage with genuine wet seal on bearings
Pump: Triple piston ceramic plunger pump rated at 2000 psi
Working Pressure: 0-1200psi
Drive Motor: 2.0hp, 1.5kw fully enclosed induction motor
Heater: 5AMP
Total System Airflow: 108 CFM
Static Pressure (Maximum) 60 inches (water lift)
Weight (blower unit only): 50 lbs
Air Injector Hole 3/16 inch (wall), 1/4 inch (cabinet)
Capacity: 134 linear feet (using 1 injector every 16”)
Power Draw (115 Volts): 5.6 amps—11 amps (depending on load)
Drying Modes: Negatively or Positively
Warranty: 7 year – Housing 3 year – Blower 1 year Parts – Limited

Documentation

Product Manual