Water Extraction

Water Extraction

Water Extraction or Sub surface extraction

Water Extraction is the best method for flushing out the cause of odors and reappearing spots.
Our Water Extraction tools are used by the cleaning and flood restoration industry to thoroughly remove surface & sub surface contaminants, liquids, and odors that have soaked into carpet padding.

  • The SteamVac SUPA GULPA is targeted head-on at flood recovery jobs. Sporting 4 vacuum motors mounted onto a 2” ported vacuum chamber which has been completely redesigned to allow maximum air flow. Highly portable, this extraction machine is also up to 18kg lighter than a typical HWE unit, due to the absence of the pump/motor assembly. This portable accommodates a single tank, rather than the typical combination of waste and solution tanks commonly found in HWE portables. This means that the recovery capacity has been doubled. Inside the tank, a supercharged 195lpm submersible waste pump is fitted in order to be able to deal with expelling the much higher volume and rate of water recovery which this machine is capable of. In turn, the waste pump is mated to a 1.5” coupling mounted to the front wall of the machine, to which a standard 1.5” vacuum hose with a one-way valve is attached, to allow a large volume of water to be expelled (unlike standard portables fitted with a waste pump which only have a ½” or ¾” at best waste outlet). Put simply, the machine is capable of extracting and expelling an astounding 100 litres of water within 30 seconds, which is between 4 to 5 times the rates of other portables – for unparalleled performance in water recovery. The SUPA GULPA comes to its own in large areas, be it a commercial or domestic application, where there is extensive flooding and high saturation of floor coverings. Unlike a standard submersible pump which could only be placed in situ, this portable machine can be coupled with any standard 2” or 1.5” vacuum hose and a carpet wand, water claw, or a ride-on extractor for never-seen-before rates of water displacement.  
  • Sale!
    Dri-Eaz Extraction Tool Dri-Eaz Extraction Tool

    Dri-Eaz Extraction Tool

    $1,535.91 $1,396.40 inc GST

    Dri-Eaz Extraction Tool

    Easy operation, fast extraction, more profit
    The Dri-Eaz Extraction Tool significantly improves initial extraction productivity and increases profitability.
  • Spot Lifter Water Claw 7X8"

    Sub-Surface Spot Lifter

    A Spotting Revolution Has Begun!
    If the problem is in the carpet backing or the pad, then the solution is the Water Claw Sub-Surface Spot Lifter. Flush out urine contamination, soda pop, oils, soap residues, food spills, etc., completely. Use with a truckmount, portable, or mini-extractor. Accepts 1.5" or 2" hose cuffs.  
  • Sale!
    Hydro-Force Water Claw Flood Extractor Hydro-Force Water Claw Flood Extractor Medium

    Sub-Surface Extraction

    The Water Claw has introduced to the carpet maintenance industry a tool specially designed to extract water out of BOTH carpet and pad from the surface!
    Designed for quick and easy flood extraction in preparation to the final drying process.  The Water Claw's speed, performance and profitability in doing most flood jobs WITHOUT removing carpet and pad has been proven in thousands of flood restorations worldwide.  In addition, the Water Claw Flood Extractor can be used to quickly evacuate black water floods allowing you to more easily remove and carry out carpet and pad.

    How the Water Claw Enhances Your Current Extraction Capabilities

    Specially designed bottom plate maximizes suction and water channeling into vacuum chamber.  The extraction plate grid and vacuum manifold have been scientifically designed to multiply and enhance your sub-surface flood lifting capabilities in the same way a pulley system multiplies and increases weight lifting ability.  
  • Sale!
    Hydro-Force Water Claw Flood Extractor Hydro-Force Water Claw Flood Extractor Large

    Sub-surface Extraction

    The Water Claw has introduced to the carpet maintenance industry a tool specially designed to extract water out of BOTH carpet and pad from the surface!
    Designed for quick and easy flood extraction in preparation to the final drying process.  The Water Claw's speed, performance and profitability in doing most flood jobs WITHOUT removing carpet and pad has been proven in thousands of flood restorations worldwide.  In addition, the Water Claw Flood Extractor can be used to quickly evacuate black water floods allowing you to more easily remove and carry out carpet and pad.

    How the Water Claw Enhances Your Current Extraction Capabilities

    Specially designed bottom plate maximizes suction and water channeling into vacuum chamber.  The extraction plate grid and vacuum manifold have been scientifically designed to multiply and enhance your sub-surface flood lifting capabilities in the same way a pulley system multiplies and increases weight lifting ability.  
  • Heavy-Duty Water Claw Bag with Logo

    16" Wide × 10" Tall

    For Medium Water Claws This bag is a must-have for your water claw.  The mesh sides and bottom allow for easy drainage.  The reinforced handle makes it easy to carry your Water Claw to and from the job site.  Directions and precautions for using the Water Claw are printed on the back of the bag.  
  • Heavy-Duty Water Claw Bag with Logo

    20" Wide × 12" Tall

    For Large Water Claws This bag is a must-have for your water claw.  The mesh sides and bottom allow for easy drainage.  The reinforced handle makes it easy to carry your Water Claw to and from the job site.  Directions and precautions for using the Water Claw are printed on the back of the bag.